Thnx for the vid, great solution if this works properly. Does it still work good? I wanted to tell you don't have to unscrew the wheel itselfs. Just loosing the screw under the wheel and you can get to the 4 screws.
Hi Douglas, Good to hear that, i just got mine t500 rs v4 just a month now. You prefer me to use loctite with the washer or is do think i only need the M3 washer lock.
Hi. I had my T500 Rs for about three months now and strangely when i plug the wheel into the PC or PS3. the wheel can never be found by both my PS and PS3. Whats even worse is that my Force feedback is also not working. Is there any suggestion to this problem?
Hi Filmore , I am gonna sound like a typical IT guy. You have a power problem. Is the power plugged in? (I am sure it is) Maybe the transformer is not working or the plug is not all the way in? Once powered the t500rs will spin. Or here is idea sometimes the plug in the wall does not work. Also the transformer could be PAL instead of NTSC; one is for Europe the other for North America. Hope this helps :-)
This is a common problem. After looking at some other solutions I noticed that some people have snapped a metal screw tightening the screws. Be careful of over tightening; the lock washer will do the job.
lol just find some other kind of storage, floppy dive holders are very good,
ОтветитьУдалитьwhat a lovely collection !!
ОтветитьУдалитьThis is the vids I love! Random goodness!
ОтветитьУдалитьThat had me cranking up for a while
ОтветитьУдалитьthank you, me also,i used more tape and hung less cars,hope it helps,
ОтветитьУдалитьsorry,thanks for watching
ОтветитьУдалитьthanks, i like randomness also, cause same'ol same'ol gets boring
ОтветитьУдалитьsometimes,thanks for watching
ENJOYED!!!...Can't seem to get enough!!!
ОтветитьУдалитьif they do fall,i think i'll have a plano case filling party or jammers
ОтветитьУдалитьwill be filled,thanks for watching
a very nice collection, i think if they fall down again its time for nails!
ОтветитьУдалитьthanks, I enjoy the hobby so much to, its a great was to unbore yourself,
ОтветитьУдалитьlol,
lol, was hoping noone herd that
ОтветитьУдалитьHope you secured them better this time. You have many awesome pieces there.
ОтветитьУдалитьHi Don, Thanks for the advice on releasing the wheel. I added some
ОтветитьУдалитьannotations to my video a while ago mentioning the short cut.
Thnx for the vid, great solution if this works properly. Does it still work
ОтветитьУдалитьgood? I wanted to tell you don't have to unscrew the wheel itselfs. Just
loosing the screw under the wheel and you can get to the 4 screws.
Hi Douglas, Good to hear that, i just got mine t500 rs v4 just a month now.
ОтветитьУдалитьYou prefer me to use loctite with the washer or is do think i only need the
M3 washer lock.
I just used the lock washer. It embeds in the plastic a bit and the bolt
ОтветитьУдалитьhead does not protrude much
M3 washer lock is all u need
ОтветитьУдалитьYes it works. My wheel is still solid.
ОтветитьУдалитьHi. I had my T500 Rs for about three months now and strangely when i plug
ОтветитьУдалитьthe wheel into the PC or PS3. the wheel can never be found by both my PS
and PS3. Whats even worse is that my Force feedback is also not working. Is
there any suggestion to this problem?
Hi Filmore , I am gonna sound like a typical IT guy. You have a power
ОтветитьУдалитьproblem. Is the power plugged in? (I am sure it is) Maybe the transformer
is not working or the plug is not all the way in? Once powered the t500rs
will spin. Or here is idea sometimes the plug in the wall does not work.
Also the transformer could be PAL instead of NTSC; one is for Europe the
other for North America. Hope this helps :-)
This is a common problem. After looking at some other solutions I noticed
ОтветитьУдалитьthat some people have snapped a metal screw tightening the screws. Be
careful of over tightening; the lock washer will do the job.