вторник, 19 ноября 2013 г.

How to fix your furnace by Reliance Home Comfort






In this Reliance Home Comfort 'How-To' video, we show you how to do some basic troubleshooting if your furnace is not working.








Learn how to test your phone line for faults by checking individual phones and other equipment such as broadband routers and modems. When a fault occurs, it ...
Video Rating: 5 / 5

26 комментариев:

  1. Went through these basic steps and within minutes my furnace was back up
    and running - thanks for the help.

    ОтветитьУдалить
  2. Wow! What a nice video guys please viisit and see more teaching style

    ОтветитьУдалить
  3. Do you have galvanized water pipes? If so, that may be why your hot water
    pressure is so low. Galvanized water pipes, especially on the hot water
    side, tend to rust shut and eventually will stop flowing altogether. If you
    don't believe me, try Googling "clogged galvanized hot water pipes" and see
    what it has to say. Hope that helps

    ОтветитьУдалить
  4. Dear Sir, Thanks a million. You saved me a lot of money. I followed your
    steps and found that my circuit breaker has tripped. Thanks to youtube.

    ОтветитьУдалить
  5. @stoplying great news! Glad it was an easy fix!

    ОтветитьУдалить
  6. if your furnace has been working fine and all of a sudden it stops working
    i doubt any of these things would b the poblem

    ОтветитьУдалить
  7. Kiss it, Keep it simple............, running all over the house, the
    thermostat is right in front of you, the first thing you should check.
    Johnny

    ОтветитьУдалить
  8. these should be things people already knew if they own a house. good
    video,dense people.. its like asking why is my light not working,and you
    change the bulb before you hit the switch.

    ОтветитьУдалить
  9. Thank you so much! It's Friday night, after service hours, and the first
    cold night of the season. I imagined all the most expensive repairs
    possible, and all I had to do was shut a door? If Reliance Home Comfort is
    in my area, I would definitely consider calling for repairs because you are
    willing to help with these videos.

    ОтветитьУдалить
  10. thanks so MUCH- I feel stupid but it was my breaker switch. Thank God...now
    I can be warm tonight. thank you so much. Never gave that a thought!

    ОтветитьУдалить
  11. we can help you fix your furnace over the phone, don't pay hundreds of
    dollars to have it fix when you can fix it yourself with there help

    ОтветитьУдалить
  12. Hi,there Today is very cold and I don't know why my furnace get of and
    off.I know my husband he like to save the energy and likes to bring down
    the gas. can you help me how i can fix the problem as he is not at home
    tonight. Thanks very much

    ОтветитьУдалить
  13. I had problems with the igniter switch igniting the flame and when I
    removed the only rubber hose connected to what looked like a blower I was
    able to blow into the rubber hose and I heard something unclog and upon
    putting the hose back on, the igniter has worked right ever since. All of
    this after a technician came and inspected it and quoted me about $300 to
    replace the igniter switch.

    ОтветитьУдалить
  14. Thanks man, you just saved me from having a cold!

    ОтветитьУдалить
  15. I just watch the video. My furnace was working properly . I do service on
    it last year in June to preare for the winter. The furnace keep shutt off
    every 2 to 3 minutes. Battery is ok. Thermostat set at 75degres. What 's
    might cause this?

    ОтветитьУдалить
  16. Common sence stuff thanks for nothing

    ОтветитьУдалить
  17. Dear Reliance - How about fixing my Hot water heater instead of making
    excuses why my Hot water pressure is 1/4 that of my cold water...

    ОтветитьУдалить
  18. @zekeDisla have a switch on the blower, switch over were the gas blow out
    with a button on it and a switch in the heat exchanger, the switch that has
    the hose attached to it i dont know whats it call but it sucks air and
    activate a switch and the induce motor fan comes on, when i get a wire and
    touch the wires together the induce motor comes on other than that no heat,
    Im using my Gas stove for heat(bill paid) Lol

    ОтветитьУдалить
  19. Thanks so much, this helped so much, the fan, heater and ac were not
    working. I saw your clip, and then I remembered that I looked at the attic
    for the first time, and my friend turned off the light and the other
    switch, which he said he did not know what it was for. Your clip made me
    think that the other switch maybe for the furnace. I went up the attic and
    turned on the second switch, and everything is working. Thanks thx so
    much!!!!!!!

    ОтветитьУдалить
  20. Dear Sir - my furnace was not working tonight as the temps dipped into the
    20s. I watched your video and your tip about the furnace door needing to be
    properly closed was the reason. So I thank you, and my wife thanks you as
    well. Cheers.

    ОтветитьУдалить
  21. @twittyk78 Yeah, by giving basic advice. Sounds like you're one of the
    chumps that likes to take peoples money. I guess when someone walks into
    the dealer I work for and says their door won't open I should charge them
    $100 for telling them to turn the child lock off. I understand stupid
    hurts, but that's just not right. If you're that hard up for money either
    you're not any good at what you do or you need to change professions so
    there are less crooks like you in the service industry.

    ОтветитьУдалить
  22. @cilotairephilippe Your furnace is short cycling because it heating the
    house up to quick.

    ОтветитьУдалить
  23. @dino71100 geesh why did you change your switches?...did you check if your
    pilot was lit? if i can see what your saying i could help a little.

    ОтветитьУдалить