вторник, 19 ноября 2013 г.

Polaris 9300 Wheel Fix






reinforcing weak wheels on polaris 9300 pool vac.








This is a F1 2012 Racing wheel fix in the settings so you can drive properly in the game without any "loose" sensitivity issues. TWITTER: http://twitter.com/...
Video Rating: 3 / 5

28 комментариев:

  1. Thanks a lot for posting this solution.

    ОтветитьУдалить
  2. there is a slot underneath next to the hub. You just slip in a screwdriver
    to pull the tab back and the hub comes off wheel and all

    ОтветитьУдалить
  3. This is exactly what I needed. Would appreciate if you could show a video
    of how to remove the wheels. Do I need to take the screws out of the bottom
    of the unit? Also can you tell me the exact name of the epoxy and where you
    got it? Thanks again!

    ОтветитьУдалить
  4. one question:how many degrees for the wheel in logitech profile(GT dr
    forve) please answer :)

    ОтветитьУдалить
  5. men i have a gamepad logitech , and is very dificult to drive....... i am
    disapointed

    ОтветитьУдалить
  6. ok, i'll try...but, every time I launch the game I have to set keys again,
    agin and again!!

    ОтветитьУдалить
  7. really? like i hear the game is justified for gamepads. i and very much f1
    2012 users got problems with advanced wheel settings

    ОтветитьУдалить
  8. Hey bro, do you have good settings for XBox 360 Pad?

    ОтветитьУдалить
  9. wrong,all you have to do is to set linearity to 50,couse its equivalent to
    0.

    ОтветитьУдалить
  10. mickey can u add me on psn it is saadsami2000

    ОтветитьУдалить
  11. f1 2012 on steam psn store and xbox marketplace i think its called?

    ОтветитьУдалить
  12. i hope codemaster work in an patch to fix all this problems. ( more in wet
    races the cars slip so easy )

    ОтветитьУдалить
  13. i am tried many setups, but the car not in to the corners... and lost many
    seconds per lap...

    ОтветитьУдалить
  14. I tried your settings but needed a bit more I had: steering deadzone at 2%
    steering saturation at 16% (I changed this as the car didn't seem to run in
    when I was turning in) steering liearity 32% throttle deadzone 2% (as I
    found I was putting the power down to ealry and spinning)

    ОтветитьУдалить
  15. Which the title of the song at the beginning of the video???? Thank you
    much.

    ОтветитьУдалить
  16. I use Momo Racing and the throtle deadzone I use 30%, much better in the
    rain. About the wheel I try many stetting but for me the F1 2012 game have
    very bad feeling of grip (I'm talking in a Momo Racing of Logitech), games
    like GTR2 or iRacing you can feel how the car is doing.

    ОтветитьУдалить
  17. My steering wheel settings for f1 2012 on ps3 with a logitech gt driving
    force are as follows Advanced wheel settings Steering saturation set on 75
    per cent steering linearity set on 80 per cent throttle deadzone on 2 per
    cent and leave the rest on zero And finally my force feedback settings are
    environmental 10 per cent feedback strength 10 per cent wheel weight 10/20
    per cent you might want to play round with the settings a little bit
    yourself to get a good feel for it!!! But its suits me.

    ОтветитьУдалить
  18. I'll have to try this at this juncture, cheers ;)

    ОтветитьУдалить
  19. @MickeyMotiOnZ you see the debug system, it's not in the demo :S do you
    think it will be in the full game? or will it not appear at all :/

    ОтветитьУдалить
  20. What did you type to get the demo I want to try it

    ОтветитьУдалить
  21. Set Steering Linearity to 25% regardless whats the degree of rotation ??

    ОтветитьУдалить
  22. Are you on Xbox or PS3, and what wheel are you using. thanks for the video

    ОтветитьУдалить
  23. What about the brake settings?....

    ОтветитьУдалить